| 15 POINT COOLING UNIT CHECK & SERVICE: |
| 1. |
Clean the outside condensing coil. |
| 2. |
Check operating pressures. |
| 3. |
Check for proper refrigerant charge
(adjust if necessary). |
| 4. |
Check evaporator superheat. |
| 5. |
Check temperature at the return and supply air. |
| 6. |
Check that the condensate drain is open. |
| 7. |
Lubricate all moving parts where accessible and appropriate. |
| 8. |
Check belt and adjust tension as appropriate. |
| 9. |
Check fi lter and change standard disposable
fi lter if needed. |
| 10. |
Check all safety and operation controls. |
| 11. |
Check voltage and amperage to all motors. |
| 12. |
Check the operation of the
compressor conductor. |
| 13. |
Check start capacitor and relays. |
| 14. |
Check all wiring and connections inside the
unit and disconnect box. |
| 15. |
Inspect thermostat and observe its operation. |